Gloves
Glove Crafters Fire Armor Gloves

A true three-dimensional form fitting glove with a curved finger design, inset thumb with enhanced finger dexterity. The one piece back shell is made from FR and water expellent 100% Kevlar knit fleece 7.5 oz. fabric with exceptional flexibility across back of hand. A non-restricting Eversoft® leather knuckle band is sewn across back for added knuckle protection. Elastic is sewn into wrist crease for close fitting cuff.
Back is lined with a layer of 6 oz. modacrylic non-melting and non-dripping liner.
A double-backed 3 mil Pryotect Barricade moisture barrier is breathable, 100 % water proof, viral/chemical penetration resistant, and provides blood borne pathogen protection. Barrier extends full length of glove for complete protection. The 6 oz. 65% Kevlar® and 35% Nomex® stitch bonded FR liner insulates the inside back of hand.
Five separate finger fochettes have curved and form fitted cut from 3.5 oz. to 4 oz. black Flexor cowhide tanned to meet NFPA flame test for the highest finger dexterity.
Special breathable adhesive is coated over entire finger, thumb and palm area, ensuring full liner/barrier/glove adhesion meets NFPA requirements for liner retention.
Palm is 1 piece 3.5 to 4.0 oz. Eversoft cow leather tanned to meet NFPA flame resistance test and treated with additives to stay soft when wet with low water absorbance during repeated soakings. Thumb is 2piece inset into palm to provide unrestricted movements of the thumb right to left. Glove liner has a 2 inch grain leather cuff sewn inside glove wrist over top of the liner for the gauntlet model and bond with 1 1/2 inch black FR binding to finish cuff. Wristlet model has a 4” Black Nomex® cuff with leather pull patch and hang up loop. This glove is sewn completely with 30/3 Kevlar® thread. This glove is certified to NFPA NFPA 1971-2013 by the Safety Equipment Institute (SEI).
Back is lined with a layer of 6 oz. modacrylic non-melting and non-dripping liner.
A double-backed 3 mil Pryotect Barricade moisture barrier is breathable, 100 % water proof, viral/chemical penetration resistant, and provides blood borne pathogen protection. Barrier extends full length of glove for complete protection. The 6 oz. 65% Kevlar® and 35% Nomex® stitch bonded FR liner insulates the inside back of hand.
Five separate finger fochettes have curved and form fitted cut from 3.5 oz. to 4 oz. black Flexor cowhide tanned to meet NFPA flame test for the highest finger dexterity.
Special breathable adhesive is coated over entire finger, thumb and palm area, ensuring full liner/barrier/glove adhesion meets NFPA requirements for liner retention.
Palm is 1 piece 3.5 to 4.0 oz. Eversoft cow leather tanned to meet NFPA flame resistance test and treated with additives to stay soft when wet with low water absorbance during repeated soakings. Thumb is 2piece inset into palm to provide unrestricted movements of the thumb right to left. Glove liner has a 2 inch grain leather cuff sewn inside glove wrist over top of the liner for the gauntlet model and bond with 1 1/2 inch black FR binding to finish cuff. Wristlet model has a 4” Black Nomex® cuff with leather pull patch and hang up loop. This glove is sewn completely with 30/3 Kevlar® thread. This glove is certified to NFPA NFPA 1971-2013 by the Safety Equipment Institute (SEI).
Glove Crafters Fire Hog Gloves

Flame and heat resistant 3.5 oz. to 4.0 oz. Eversoft® cowhide leather palm tanned to meet NFPA flame test with additives to stay soft and have low water absorbance when wet repeatedly. A girdle is sewn into palm for positive grip and extended wear for thumb area. Welts sewn into the middle and ring fingers for extra seam strength.
3.5 to 4.0 oz. smooth grain Flexor cow leather back with a knuckle band sewn across knuckles to give a layer of extra protection with a 60+ TPP rating.
A double layer of soft 6 oz. FR modacrylic no melt no drip liner for a smooth inside feel and heat protection to the back of hand.
A leather cuff is sewn inside wrist opening over liner for extended wear of liner and smoother donning.
Exclusive breathable adhesive is coated over entire finger, thumb and palm area, ensuring full liner/barrier/glove bonding. Pyrotect Barricade 3 mil moisture barrier Is breathable 100 % water proof, protects from viral, chemical penetration and blood borne pathogens; extends full length of glove for full protection.
4” Nomex® wristlet close fitting cuff to prevent embers or sharp debris entry extending not less than 2 inches beyond wrist crease with elastic sewn on back to wrist area. Gauntlet style has smooth grain all leather 1 inch cuff hemmed over top of glove. Elastic is sewn to wrist crease on back and palm for close fitting cuff. This glove meets the NFPA
1971-2013 standard and is SEI certified.
3.5 to 4.0 oz. smooth grain Flexor cow leather back with a knuckle band sewn across knuckles to give a layer of extra protection with a 60+ TPP rating.
A double layer of soft 6 oz. FR modacrylic no melt no drip liner for a smooth inside feel and heat protection to the back of hand.
A leather cuff is sewn inside wrist opening over liner for extended wear of liner and smoother donning.
Exclusive breathable adhesive is coated over entire finger, thumb and palm area, ensuring full liner/barrier/glove bonding. Pyrotect Barricade 3 mil moisture barrier Is breathable 100 % water proof, protects from viral, chemical penetration and blood borne pathogens; extends full length of glove for full protection.
4” Nomex® wristlet close fitting cuff to prevent embers or sharp debris entry extending not less than 2 inches beyond wrist crease with elastic sewn on back to wrist area. Gauntlet style has smooth grain all leather 1 inch cuff hemmed over top of glove. Elastic is sewn to wrist crease on back and palm for close fitting cuff. This glove meets the NFPA
1971-2013 standard and is SEI certified.
Glove Crafters Fire Pro 2 Glove

3.5 to 4.0 oz. flame and heat resistant 3.5 oz. to 4.0 oz.Eversoft® cowhide leather. palm tanned to pass NFPA flame resistance test with additives to stay soft and low water absorbance when wet repeatedly. Welts sewn into the middle and ring fingers and thumb
for extra seam strength. A double layer of soft 6 oz. FR modacrylic no melt no drip liner for a smooth inside feel and heat protection to the back of hand. Special breathable adhesive is coated over finger and thumb area, ensuring full liner/barrier/glove bonding.
3 mil Pyrotect Barricade moisture barrier is breathable and 100 % water proof, protects from viral penetration and blood borne pathogens and extends full length of glove for full
protection. 4” Nomex® wristlet close fitting cuff to prevent embers or sharp debre entry extending not less than 2 inches beyond wrist crease with elastic sewn to wrist area.
Gauntlet style has an all leather hemmed cuff with leather hang up loop extending beyond wrist with elastic sewn at wrist crease palm and back for close fitting. This glove meets the NFPA 1971-2013 standard and is SEI certified
for extra seam strength. A double layer of soft 6 oz. FR modacrylic no melt no drip liner for a smooth inside feel and heat protection to the back of hand. Special breathable adhesive is coated over finger and thumb area, ensuring full liner/barrier/glove bonding.
3 mil Pyrotect Barricade moisture barrier is breathable and 100 % water proof, protects from viral penetration and blood borne pathogens and extends full length of glove for full
protection. 4” Nomex® wristlet close fitting cuff to prevent embers or sharp debre entry extending not less than 2 inches beyond wrist crease with elastic sewn to wrist area.
Gauntlet style has an all leather hemmed cuff with leather hang up loop extending beyond wrist with elastic sewn at wrist crease palm and back for close fitting. This glove meets the NFPA 1971-2013 standard and is SEI certified
Glove Crafters Fire Raider Glove

A true three-dimensional form fitting glove with a curved finger design, inset thumb with enhanced finger dexterity. Five separate finger fochettes have curved and form fitted cut from 3.5 oz. to 4 oz. black Flexor cowhide tanned to meet NFPA flame test for the highest finger dexterity. Special breathable adhesive is coated over entire finger, thumb and palm area, ensuring full liner/barrier/glove adhesion meets NFPA requirements for liner retention. Flame and heat resistant 3.5 oz. to 4.0 oz. Eversoft® cowhide leather palm tanned to meet NFPA flame test with additives to stay soft and have low water absorbance when wet repeatedly. A girdle is sewn into palm for positive grip and extended wear for thumb area. Welts sewn into the middle and ring fingers for extra seam strength.
3.5 to 4.0 oz. smooth grain Flexor cow leather back with a knuckle band sewn across knuckles to give a layer of extra protection with a 60+ TPP rating. A double layer of soft 6 oz. FR modacrylic no melt no drip liner for a smooth inside feel and heat protection to the back of hand. A leather cuff is sewn inside wrist opening over liner for extended wear of liner and smoother donning. Exclusive breathable adhesive is coated over entire finger, thumb and palm area, ensuring full liner/barrier/glove bonding. Pyrotect Barricade 3 mil moisture barrier
Is breathable 100 % water proof, protects from viral, chemical penetration and blood borne pathogens; extends full length of glove for full protection. 4” Nomex® wristlet close fitting cuff to prevent embers or sharp debris entry extending not less than 2 inches beyond wrist crease with elastic sewn on back to wrist area. Gauntlet style has smooth grain all leather 1 inch cuff hemmed over top of glove. Elastic is sewn to wrist crease on back and palm for
close fitting cuff. This glove meets the NFPA 1971-2013 standard and is SEI certified.
3.5 to 4.0 oz. smooth grain Flexor cow leather back with a knuckle band sewn across knuckles to give a layer of extra protection with a 60+ TPP rating. A double layer of soft 6 oz. FR modacrylic no melt no drip liner for a smooth inside feel and heat protection to the back of hand. A leather cuff is sewn inside wrist opening over liner for extended wear of liner and smoother donning. Exclusive breathable adhesive is coated over entire finger, thumb and palm area, ensuring full liner/barrier/glove bonding. Pyrotect Barricade 3 mil moisture barrier
Is breathable 100 % water proof, protects from viral, chemical penetration and blood borne pathogens; extends full length of glove for full protection. 4” Nomex® wristlet close fitting cuff to prevent embers or sharp debris entry extending not less than 2 inches beyond wrist crease with elastic sewn on back to wrist area. Gauntlet style has smooth grain all leather 1 inch cuff hemmed over top of glove. Elastic is sewn to wrist crease on back and palm for
close fitting cuff. This glove meets the NFPA 1971-2013 standard and is SEI certified.
Glove Crafters Glove Strap

The Glove Crafters Glove Strap is a convenient glove holder
that clips onto a firemen’s belt loop. Available both with Fire Armor logo and without.
that clips onto a firemen’s belt loop. Available both with Fire Armor logo and without.
Dragon Fire Alpha X Glove

The new Alpha X structural firefighting glove is certified by SEI to latest NFPA 1971 standard (2007 edition). Full and complete natural leather outer shell Premium Italian top grain cow and swine hide No fabric utilized on outer shell Unequaled wet grip strength Strategic wear and grip pads on finger tips / thumb Excellent cut / rip / abrasion resistance Overall anatomically correct ergonomic design
Unique features: Extreme dexterity with no sacrifice of protection Glove refuses to harden or stiffen and remains soft / pliable after repeated use Glove conforms and takes on unique hand signature of user after repeated use Hand is effortlessly able to be inserted and removed when glove and or hand is wet or sweaty Liner remains intact (no pull out) and is guaranteed Critical palm and back of hand (greater knuckle region) have highest obtainable certification TPP rating of greater than 60 All sizes and configurations in stock and ready to ship Each pair packaged with versatile reusable utility bag and Velcro glove strap
Thermal Urethane Vapor Barrier: Proprietary formulation specifically designed for the fire service Robotic welded seams (not glued) 350% elongation prior to burst (memory free performance) Degradation (melt point) well above NFPA requirements Superior liquid penetration resistance Multiple sizes to accommodate various glove sizing
Kovenex Thermal Liner: A revolutionary fabric made from a special patented blend of High-performance fibers
Unique features: Extreme dexterity with no sacrifice of protection Glove refuses to harden or stiffen and remains soft / pliable after repeated use Glove conforms and takes on unique hand signature of user after repeated use Hand is effortlessly able to be inserted and removed when glove and or hand is wet or sweaty Liner remains intact (no pull out) and is guaranteed Critical palm and back of hand (greater knuckle region) have highest obtainable certification TPP rating of greater than 60 All sizes and configurations in stock and ready to ship Each pair packaged with versatile reusable utility bag and Velcro glove strap
Thermal Urethane Vapor Barrier: Proprietary formulation specifically designed for the fire service Robotic welded seams (not glued) 350% elongation prior to burst (memory free performance) Degradation (melt point) well above NFPA requirements Superior liquid penetration resistance Multiple sizes to accommodate various glove sizing
Kovenex Thermal Liner: A revolutionary fabric made from a special patented blend of High-performance fibers
Dragon Fire Alpha X Texan Glove

The new Alpha X Texan structural firefighting glove is certified by SEI to latest NFPA 1971 standard (2007 edition). Full and complete natural leather outer shell Premium Italian top grain cow and swine hide No fabric utilized on outer shell Unequaled wet grip strength Strategic wear and grip pads on finger tips / thumb Excellent cut / rip / abrasion resistance Overall anatomically correct ergonomic design
Unique features: Extreme dexterity with no sacrifice of protection Glove refuses to harden or stiffen and remains soft / pliable after repeated use Glove conforms and takes on unique hand signature of user after repeated use Hand is effortlessly able to be inserted and removed when glove and or hand is wet or sweaty Liner remains intact (no pull out) and is guaranteed Critical palm and back of hand (greater knuckle region) have highest obtainable certification TPP rating of greater than 60 All sizes and configurations in stock and ready to ship Each pair packaged with versatile reusable utility bag and Velcro glove strap
Thermal Urethane Vapor Barrier: Proprietary formulation specifically designed for the fire service Robotic welded seams (not glued) 350% elongation prior to burst (memory free performance) Degradation (melt point) well above NFPA requirements Superior liquid penetration resistance Multiple sizes to accommodate various glove sizing
Kovenex Thermal Liner: A revolutionary fabric made from a special patented blend of High-performance fibers
Unique features: Extreme dexterity with no sacrifice of protection Glove refuses to harden or stiffen and remains soft / pliable after repeated use Glove conforms and takes on unique hand signature of user after repeated use Hand is effortlessly able to be inserted and removed when glove and or hand is wet or sweaty Liner remains intact (no pull out) and is guaranteed Critical palm and back of hand (greater knuckle region) have highest obtainable certification TPP rating of greater than 60 All sizes and configurations in stock and ready to ship Each pair packaged with versatile reusable utility bag and Velcro glove strap
Thermal Urethane Vapor Barrier: Proprietary formulation specifically designed for the fire service Robotic welded seams (not glued) 350% elongation prior to burst (memory free performance) Degradation (melt point) well above NFPA requirements Superior liquid penetration resistance Multiple sizes to accommodate various glove sizing
Kovenex Thermal Liner: A revolutionary fabric made from a special patented blend of High-performance fibers
Dragon Fire First Due Rescue Glove

The First Due Rescue glove has a sewn in flame, cut, puncture, thermal and abrasion resistant liner. Inside is a thinner layer of Kovenex, the same thermal layer we use in our famed Alpha X gloves. This provides a level of flash protection allowing you vital seconds to remove your hands from the dangerous environment. The palm and knuckle areas are constructed using premium synthetic leather and strategically placed wear pads.
The glove is finished with a high dexterity outer shell with double stitched extremely flexible diamond profile rubber wear pads. The thermal liner and exterior are stitched together increasing the strength of the seams allowing for extended life of the glove. Dragon Fire’s exclusive task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
Specifications
Sizes: Small, Medium, Large, Extra Large, 2X Large, 3X Large
The glove is finished with a high dexterity outer shell with double stitched extremely flexible diamond profile rubber wear pads. The thermal liner and exterior are stitched together increasing the strength of the seams allowing for extended life of the glove. Dragon Fire’s exclusive task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
Specifications
Sizes: Small, Medium, Large, Extra Large, 2X Large, 3X Large
Dragon Fire BBP Rescue Glove

The BBP Rescue glove has a sewn in flame, cut, puncture, thermal and abrasion resistant liner. Integrated into our glove is our field proven, extreme duty vapor/BBP barrier.
Utilizing the same Kovenex fabric as our famed Alpha X glove the BBP Rescue provides a level of thermal and flash protection not found in any other rescue glove. This protection affords the responder additional protection from hazards on the job. The palm is comprised of premium synthetic leather and strategically placed wear pads. The knuckles are protected with a form fitting impact protection pad finished in wear resistant premium synthetic leather.
The glove is finished with a double stitched high dexterity shell, high visibility retro-reflective markings, thermal liner, and pathogen barrier. Attention to detail and utilization of our Extreme Bond Rentention Design yields a glove free of liner pull while allowing the responder to remain nimble and highly dexterous. Dragon Fire’s exclusive full tri-layer task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
Specifications
Sizes: Small, Medium, Large, Extra Large, 2X Large, 3X Large
Utilizing the same Kovenex fabric as our famed Alpha X glove the BBP Rescue provides a level of thermal and flash protection not found in any other rescue glove. This protection affords the responder additional protection from hazards on the job. The palm is comprised of premium synthetic leather and strategically placed wear pads. The knuckles are protected with a form fitting impact protection pad finished in wear resistant premium synthetic leather.
The glove is finished with a double stitched high dexterity shell, high visibility retro-reflective markings, thermal liner, and pathogen barrier. Attention to detail and utilization of our Extreme Bond Rentention Design yields a glove free of liner pull while allowing the responder to remain nimble and highly dexterous. Dragon Fire’s exclusive full tri-layer task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
Specifications
Sizes: Small, Medium, Large, Extra Large, 2X Large, 3X Large
Dragon Fire Tru Fit Rescue Glove

The Tru-Fit Rescue glove includes a sewn in flame, cut, puncture, thermal and
abrasion resistant liner. Inside is a thinner layer of Kovenex, the same thermal
layer we use in our famed Alpha X gloves. This provides a level of flash protection allowing you vital seconds to remove your hands from the dangerous environment. The palm is comprised with premium synthetic leather and strategically placed wear pads. Our Tru-fit glove provides you with an adjustable elastic Velcro closure which creates an unsurpassed level of protection preventing anything from entering from the top of your glove.The glove is finished with a high dexterity outer shell with double stitched, extremely flexible diamond profile rubber wear pads. The thermal liner and exterior are stitched together increasing the strength of the seams allowing for extended life of the glove. Dragon Fire’s exclusive task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
Specifications
Sizes: Small, Medium, Large, Extra Large, 2X Large, 3X Large
abrasion resistant liner. Inside is a thinner layer of Kovenex, the same thermal
layer we use in our famed Alpha X gloves. This provides a level of flash protection allowing you vital seconds to remove your hands from the dangerous environment. The palm is comprised with premium synthetic leather and strategically placed wear pads. Our Tru-fit glove provides you with an adjustable elastic Velcro closure which creates an unsurpassed level of protection preventing anything from entering from the top of your glove.The glove is finished with a high dexterity outer shell with double stitched, extremely flexible diamond profile rubber wear pads. The thermal liner and exterior are stitched together increasing the strength of the seams allowing for extended life of the glove. Dragon Fire’s exclusive task specific design incorporates levels of protection not found in any other rescue, extrication or work glove.
Specifications
Sizes: Small, Medium, Large, Extra Large, 2X Large, 3X Large